
Router failure behind US flight grounding still unexplained, says Duffy
US Transportation Secretary Sean Duffy stated on Monday that investigators still cannot explain why a router installation by L3Harris Technologies at a remote Arkansas facility triggered a five-hour nationwide US flight grounding on Friday, November 13. Commercial airlines and travelers faced extensive disruptions as the technical failure cascaded across national air traffic control networks.
Data Overload Destabilises National Radar Feeds
The installation at a Federal Aviation Administration radio communications site in El Dorado flooded a key government communications system with 1,000 connection attempts every four to five seconds. That data surge destabilised aircraft communications and radar feeds, impacting 17 of 22 FAA en route centers and forcing the nationwide ground stop. The shutdown resulted in more than 18,000 cancelled flights.
Investigators are examining both the El Dorado facility and a second radar site in Amarillo, Texas, where L3Harris replaced a router three weeks prior. L3Harris subsequently blocked data traffic from both locations to stabilise the network and disabled the broadcasting function on all new routers as a precaution. The hardware updates were part of an ongoing initiative to replace Cisco routers produced in 2001.
Market fallout followed the disclosures. Shares of L3Harris fell 3.3 per cent, while Hewlett Packard Enterprise, which owns router manufacturer Juniper Networks, dropped 4.5 per cent on Monday, November 16. L3Harris stated it is fully cooperating with the official investigation. Meanwhile, Duffy urged Congress to finance a separate telecommunications network operated by AT&T, Verizon, and Lumen to reduce reliance on contractor-owned architecture.



